CAD Overlay Viewer
Aerial + 360 overlay • Layer toggle • Opacity slider • Tolerance settings
60%
Orthomosaic + CAD Overlay
360° View + CAD Projection
Deviation Check Results (Tolerance: ±25 mm)
| ID | Element | Layer | Type | Design vs Actual | Deviation | Status | Action |
|---|---|---|---|---|---|---|---|
| D-01 | Digester-2 Raft | Foundation | Position | Center (0,0) → +180E, +45N | 185 mm | Exceeds | |
| D-02 | Compressor Plinth | Structural | Dimension | 3000mm → 2700mm (L) | 300 mm | Critical | |
| D-03 | Gas Holder Ring | Civil | Position | Center → +220S, +80W | 234 mm | Exceeds | |
| D-04 | Pipe Rack P-7 | Piping | Missing | Present → Not Found | — | NCR | |
| D-05 | Control Room Corner | Civil | Dimension | 12000mm → 12050mm | 50 mm | Exceeds | |
| D-06 | Flare Stack Bolts | Structural | Missing | 4 bolts → 2 bolts | 2 Missing | NCR | |
| D-07 | Weighbridge Slab | Civil | Dimension | 200mm thick → 175mm avg | 25 mm | Within | |
| Summary: 7 checked • 3 Position • 3 Dimension • 2 Missing • 1 Within tolerance • 6 Exceed tolerance • 2 NCR Raised | |||||||